Ukuxazulula Izinkinga zeGear Motor

Kwadalwa ngo 05.17

Gear Motor ka Tlhopho

Izi zinkinga ezivamile zomshini osebenzayo zifaka phakathi ukungajoli, isivinini esingajwayelekile kanye ne-torque, umsindo ophakeme, ukuvuza ngaphakathi nangaphandle, kanye nokushisa okungajwayelekile, njll. Izindlela ezijwayelekile zokuhlola izinkinga nokuxazulula zikhonjiswa etafuleni elilandelayo. Ithebula elilandelayo libala ezinye zezimo ezivamile zokuphazamiseka kanye nezindlela zokuxazulula izinkinga zomshini we-cycloid internal meshing gear osebenzayo.

Common faults and troubleshooting of cycloid internal gear motor in use

Fault phenomenon	原因分析	排除方法
1. Motor draai nie	①Hydraulic pump not started or direction incorrect	①开启液压泵或改正泵的转向
	②油箱储油量不足	②Add to the specified oil amount
	③换向阀处于中位	③切换换向阀
	④Ithuba lokuphuma kwevalvu yokulawula liphansi kakhulu	④System pressure adjusted to the specified value
	⑤Mada chūshū zhuànjǔ bùzú	⑤更换马达
2.运转时噪声过大	①Air in the hydraulic system	①找出进气原因并排除油中空气
	②吸空	②增加供油量
	③马达内部轴承等构件故障	③Genghuan zhougou ji qita sunhuai lingjian
3.内、外泄漏过大	①密封件损坏造成内外泄露	①Replace sealing parts
	②马达零件有气孔、砂眼、裂痕等	②更换零件
	③螺栓松动	③Faka iibhola
4.异常发热	①液压油温度过高	①增加冷却能力
	②Motor efficiency reduction	②更换易损件
	③非正常磨损	③更换马达

Shiya imininingwane yakho futhi
sizokuthinta.

Phone

WeChat