I-Bosch Rexroth Axial piston variable pump A4VSG Series 1x kanye ne-3x imishini yezolimo, imikhumbi, njll.
Izici
▶▶ I-pump eqinile enempilo yesevisi ende kakhulu
▶▶ Ukuncishiswa komsindo
▶▶ Ukuhamba okuqhubekayo kokufaka amanye amapompo
kuze kube usayizi ofanayo
▶▶ Ukushintsha kwesikhumbuzo sokuhamba kwenzeka kahle uma i-swashplate
ihanjiswa endaweni ephakathi
▶▶ Umthwalo we-axial kanye ne-radial we-shaft yokushayela
▶▶ Umklamo we-modular
▶▶ Umfanekiso wokukhombisa i-swivel angle
▶▶ Izikhathi zokuphendula ezimfishane
▶▶ Ukuhamba kwe-HF-fluids ngaphansi kokusebenza okuncishisiwe
idatha enokwenzeka
▶▶ Umklamo we-swashplate
Imiyalelo yokuphepha
- Ama-pump e-A4VSG aklanyelwe ukusetshenziswa ezikhaleni ezivaliwe.
- Ukuhlela iphrojekthi, ukufaka nokwethula ama-unit e-axial piston kufanele kwenziwe abantu abanekhono.
- Ngaphambi kokusebenzisa i-unit ye-axial piston, sicela ufunde incwadi yok instruction ehambisanayo ngokuphelele. Itholakala ku-Bosch Rexroth uma iceliwe.
- Ngesikhathi nangemva kokusebenza, kukhona ingozi yokushiswa ngenxa ye-axial piston unit (ikakhulukazi i-solenoid). Thatha izinyathelo ezifanele zokuphepha (isb. gqoka izingubo zokuvikela).
- Izici ze-axial piston unit zingashintsha ngenxa yezimo ezihlukene zokusebenza (uk pressure, ubushushu bama-oyili).
Amathuba emigqa yokusebenza
· Amathuba nezintambo zokufaka aklanyelwe ingcindezi ephezulu echaziwe. Umkhiqizi wemishini noma wesistimu kufanele aqinisekise ukuthi izici zokuphepha zezingxenye zokuxhuma nemigqa zihlangabezana nezimo zokusebenza ezichaziwe (ingcindezi, ukuhamba, i-hydraulic fluid, izinga lokushisa).
· Imigqa yokusebenza nezikhala zomsebenzi zihloselwe imigqa ye-hydraulic kuphela.
- Idatha nemiyalelo equkethwe lapha kumele ilandelwe.
- Umkhiqizo awukwazi ukuvunywa njengengxenye ngokuhambisana nomqondo jikelele wezokuphepha kwemishini ngokuhambisana ne-ISO 13849.
Izikhonkwane zokufaka
Ukuze ufake izikulufu ezine-ISO metric threads ku-DIN 13 kanye ne-threads ku-ASME B1.1, siphakamisa ukuhlola ama-torques okukhulisa ukuze kuhlangabezane nekhaya elihambisana ne-VDI 2230.
· Izikhala ezine-threads ze-axial piston unit:
I-torque yok tightening evumelekile MG max yezimbobo ezinomugqa wangaphakathi iyinani eliphezulu futhi akufanele lidlulelwe.
· Izikulufu zokuvikela:
Ngokwezikulufu zokuvikela ezihlinzekwe ne-axial piston unit, i-torque yokukhulisa edingekayo i-MV yezi kulufu zokuvikela kufanele isetshenziswe.
Ukuze uthole imininingwane eyengeziwe ye-A4VSG nezinye izimodeli, sicela uxhumane nethimba lethu lokuthengisa
Ikhodi yohlobo
Ukuboniswa komkhiqizo ophelile
