I-Bosch Rexroth Axial piston variable pump A4VSG Series 1x kanye ne-3x imishini yezolimo, izikebhe, njll.
Izici
▶▶ I-pump eqinile enempilo yesevisi ende kakhulu
▶▶ Ukuncishiswa komsindo
▶▶ Ukuhamba okuqhubekayo kokufaka amanye amapump
kuze kube usayizi ofanayo
▶▶ Um方向 we-flow ushintsha kahle uma i-swashplate
ihanjiswa endaweni ephakathi
▶▶ Ikhono lok carga le-axial ne-radial ye-shaft yokushayela
▶▶ Umklamo we-modular
▶▶ Umfanekiso wokukhombisa i-swivel angle
▶▶ Izikhathi zokuphendula ezimfishane
▶▶ Ukuhamba ku-HF-fluids ngaphansi kokusebenza okuncishisiwe
idatha enokwenzeka
▶▶ Umklamo we-swashplate
Imiyalelo yokuphepha
- Ama-pump e-A4VSG aklanyelwe ukusetshenziswa ezikhaleni ezivaliwe.
- Ukuhlela iphrojekthi, ukufaka nokwethula ama-unithi e-axial piston kumele kwenziwe abantu abanekhono.
- Ngaphambi kokusebenzisa i-unithi ye-axial piston, sicela ufunde incwadi yemiyalelo efanele ngokuphelele. Itholakala ku-Bosch Rexroth uma iceliwe.
- Ngesikhathi nangemva kokusebenza, kukhona ingozi yokushiswa okuvela kwi-axial piston unit (ikakhulukazi i-solenoid). Thatha izinyathelo zokuphepha ezifanele (isb. gqoka izingubo zokuvikela).
- Izici ze-axial piston unit zingashintsha ngenxa yezimo ezahlukene zokusebenza (ukpressure, ubushushu bama-oyili).
Amathuba emigqa yokusebenza
· Amathuba nemigqa yokubopha aklanyelwe ingcindezi ephezulu echaziwe. Umkhiqizi wemishini noma wesistimu kumele aqinisekise ukuthi izici zokuphepha zezingxenye ezihlangene nemigqa zihlangabezana nezimo zokusebenza ezichaziwe (ingcindezi, ukuhamba, umswakama, izinga lokushisa).
· Imigqa yokusebenza nezikhala zomsebenzi zenzelwe imigqa ye-hydraulic kuphela.
- Idatha nemiyalelo equkethwe lapha kumele ilandelwe.
- Umkhiqizo awukwazi ukuvunywa njengengxenye ngokuhambisana nomqondo jikelele wezokuphepha kwemishini ngokuhambisana ne-ISO 13849.
Izikhonkwane zokufaka
Ukuze ufake izikulufu ezine-ISO metric threads ku-DIN 13 kanye nezintambo ku-ASME B1.1, siphakamisa ukuhlola ama-torques okukhulisa ngokuhambisana ne-VDI 2230.
· Izimbobo ezine-thread ze-axial piston unit:
I-torque yok tightening evunyelwe MG max yezimbobo ezinomugqa wangaphakathi iyinani eliphezulu futhi akufanele lidlule.
· Izikhala zokuvikela:
Ngokwezikhala zokuvikela ezihlinzekwe ne-axial piston unit, i-torque yokukhulisa edingekayo yeziqukathi zokuvikela kufanele isetshenziswe.
Ukuze uthole imininingwane eyengeziwe ye-A4VSG nezinye izimodeli, sicela uxhumane nethimba lethu lokuthengisa
Ikhodi yohlobo
Ukuboniswa komkhiqizo ophelile
